5.7.15 Changelog
Controller bugfixes/changes since 5.7.12:
-Add a validation message to the missing redirect using hostname once any social authentication method is enabled.
-Allow upper case letter in email.
-Moved device warnings to new tab in property panel.
-Added warnings count in device status badge.
-Merged Users and Guests tabs in property panel.
-Maps: show error when saving coordinates of device on map failed.
-Statistics - disallow future date in date range picker.
-Allow displaying negative temperatures for switches.
-Fixing not opening DPI clients.
-Mark Google transactions as social in Hotspot Manager.
-Fix disappearing devices on site change.
-Fix selected tab in property panel when current active tab is missing.
-Fix downloading large backups over WebRTC.
-Fix closing property panel when changing site.
-Fix connection fail after changing granularity on Statistics page with WebRtc and refreshing the page.
-AC InWall not showing any data in Switch Statistics view.
-Fixing filtering virtual devices on map.
-Fix case when incorrect port table contents cause Topology not to render.
-Fix a bug preventing email password recovery from functioning in some cases.
-Various hardware provisioning improvements.
-Various backend bugfixes and improvements.
Firmware changes since 3.9.18:
[HD/SHD/XG] Fix a memory leak when multicast enhancements are enabled.
[nanoHD] Fix MBSS support.
[nanoHD] Stability improvements.
[UAP] Fix NAS-IP-Address attribute so that it always returns the management IP of the AP.
[UAP] Various bugfixes and improvements.
[HW] Fix some issues which would cause L3 adopted devices to show up as disconnected in the controller (reported HERE and HERE).
[HW] Fix SNMP sysName.
--
5.7.12 Changelog
Controller bugfixes/changes since 5.7.11:
-In order for an AP to be capable of becoming a Mesh AP, the setting must be set in device config.
-Maps: show error when saving coordinates of device on map failed.
-Fix ETC menu on Hotspot Manager Page.
-Fix In Hotspot manager part of tooltip is displayed outside the graph.
-Incorrect client signal value in property panel, section Statistics.
-Added missing event handling for Pending Adoption Wireless discovery.
-Improvements for RADIUS profile migration at time of controller upgrade.
-Various backend bugfixes and improvements.
Firmware changes since 3.9.15:
[HD/SHD/XG] Stability and performance improvements.
[AC-IW/IW-Pro/Pro/EDU/M-Pro] Add ability to set port negotiation.*
[nanoHD] Add guest control support.
[nanoHD] Add 802.1X support.
[nanoHD] Add support for multiple BSSIDs per radio.
[nanoHD] Fix issue when using a bracket in the ESSID or PSK.
[nanoHD] Fix auto channel selection.
[nanoHD] Fix 802.11n negotiation issue.
[nanoHD] Fix issue which could cause Ethernet to stay down after provision or reboot.
[UAP] Improve STA signal reporting.
[UAP] Wireless uplink/mesh V3 improvements.
[UAP] Fix a bug with rate control when using multiple SSIDs.
[UAP] Various bugfixes and improvements.
[USW] Various improvements.
[HW] New procotol implementation.
[HW] Add controller support for netconsole.*
*controller support pending.
--
5.7.11 Changelog
Controller bugfixes/changes since 5.7.10:
-Add message with instruction to csv upload.
-Add model EOL (end of life) pending warning.
-Additional charts for Devices (Statistics -> Performance view).
-Drag and drop optimizations.
-Expand firewall group name limit to 64.
-Hide the Aggregation option under Network when UAP supports it natively.
-Improve way how Donut charts display tooltips, to prevent being overlapped by other elements.
-IPv6 - Add DHCPv6 DNS Control.
-Lock web store to US only.
-Fix displaying selected priority wireless uplink.
-Fix displaying blank page on double click on Insights.
-Fix filtering outdoor channels by using default value for outdoor mode.
-Fix handling error responses received via WebRTC channel.
-Fix missing action buttons after enabling cloud access.
-Fix saving RADIUS profile without accounting servers.
-Fix radios sorting in Configure Radios section.
-GeoIP Filtering - Block incoming/outgoing/both traffic.
-Temporarily remove WAN/WAN2 IPv6 PPPoE option.
-Rename label 'Select group' to 'Any' in firewall's form.
-SNMPv3 - Username and Password validation to match SNMPv3 standard and USG requirements.
-Show Hardware Offload as off when IPS is enabled, don't allow it to be turned on.
-Map fixes: Devices disappearing from map when changing from legacy to designer without saving and cannot change map type from Google to image at the second time.
-Several device management improvements, to improve UX and mitigate some errors.
-Various backend bugfixes and improvements.
Firmware changes since 3.9.14:
[UAPG3] Add RADIUS VLAN support to MAC authentication bypass.
[UAPG2/G3] Fix a bug which prevented APs from upgrading when bandsteering was enabled.
[AC-IW/IW-Pro/Pro/EDU/M-Pro] Add port disable support.*
[XG] Add airTime support.
[nanoHD] Add stainfo support.
[UAP] Fix outdoor flag.
[UAP] Add fast-apply for guest portal.
[UAP] Various bugfixes and improvements.
[HW] Update curl to 7.57.0.
*controller support pending.
--
5.7.10 Changelog
New Features:
-Support Antenna selection for internal antenna.
Controller bugfixes/changes since 5.7.9:
-Add message with instruction to csv upload.
-Expand firewall group name limit to 64.
-Improve way how Donut charts display tooltips, to prevent being overlapped by other elements.
-IPv6 - Add DHCPv6 DNS Control.
-Additional charts for Devices (Statistics -> Performance view).
-Fix: client history rate has wrong units.
-Fix: client history signal chart goes off the scale.
-Fix enabling https redirection when switching between authentication methods.
-Fix issue where USW management VLAN would reset to defaults on controller upgrade.
-Hide IPv6 address at network's list when network type is not 'static'.
-SVG Maps - Clicking on RF button next to the device doesn't open RF tab from device.
-Improve alerts from IDS/IPS.
-update nanoHD name.
-Add workaround for Cloud Key firmware upgrade issue, for devices on firmware 0.8.1 to 0.8.4 (reported HERE).
-Apply the same rules for both TCP and UDP DNS, which fixes the issue reported HERE.
-Various backend bugfixes and improvements.
Firmware changes since 3.9.14:
[UAPG3] Add RADIUS VLAN support to MAC authentication bypass.
[UAPG2/G3] Fix a bug which prevented APs from upgrading when bandsteering was enabled.
[AC-IW/IW-Pro/Pro/EDU/M-Pro] Add port disable support.*
[XG] Add airTime support.
[nanoHD] Add stainfo support.
[UAP] Fix outdoor flag.
[UAP] Add fast-apply for guest portal.
[UAP] Various bugfixes and improvements.
[HW] Update curl to 7.57.0.
*controller support pending.
--
5.7.9 Changelog
New Features
-Add Intrusion Prevention System (IPS) [beta].
Controller bugfixes/changes since 5.7.8:
-Display WLANs in System Config with Multicast and Broadcast blocking enabled.
-Display Default Expiration Time field for Hotspot and Facebook WiFi.
-Disable HTTPS redirection for Facebook, Facebook WiFi and Google.
-Do not remember Client Statistics page as last opened page.
-Fix cloud access GUI pages for multiple super admins.
-Fix Auto Channel dialog which hides map device labels.
-Fix Device location opens map with wrong coordinates.
-Fix Missing Traffic Stats data on first load.
-Fix Invisible coverage in maps after opening property panel and then moving AP.
-Fix resolving devices on Neighboring Access Points page.
-Fix too much space for BSSID tooltip in device list.
-Fix: Unable to place devices on designer map.
-Fix USG does not have Last Seen field.
-Fix DHCP relay configuration.
-Improved UI of Cloud Access Settings page.
-Add AP name to radar detected event.
-Allow DPI to be enabled when offload is disabled (if the firmware supports it).
Firmware changes since 3.9.10/4.4.12:
[nanoHD] Initial firmware release.
[UAPG2] Add RADIUS VLAN support to MAC authentication bypass.
[UAPXG] Fix airView.
[AC-IW/IW-Pro] Fix RADIUS VLAN when port VLAN is enabled.
[UAP] Fix a small memory leak.
[UAP] Various bugfixes and improvements.
[USG] DPI signature update.
[USG] Add IDS/IPS back end.
[USG] Fix in informs for IPv6 PD size (was causing PD size to be cleared in controller).
[USG] Add support for sending custom events to controller.
[USG] Fix DDNS update public IP checking for NATed WANs.
[USG] Local UI now checks ping to ping.ubnt.com rather than default gateway for Internet connectivity test
[USG] Copy 'hostname' and 'mailname' over during upgrades for consistency with other retained files cross-upgrade (from EdgeRouter, generally no functional impact for USG purposes).
[USGXG] Bluetooth back end updates.
[USGXG] LCM (display) firmware version updated, update process improvements.
--
5.7.8 Changelog
New Features
-Link to property panel from Location on Neighboring Access Points page.
Controller bugfixes/changes since 5.7.7:
-Add a tooltip to OpenVPN shared key UI.
-Add API error messages.
-Add progress info about loading Map.
-Display tooltip in case of attempt to adopt multiple gateways to one site.
-Additional DPI application icons (i.e. Slack).
-Improve performance of Neighboring Access Points page.
-Update translations.
-Add elite device events to notifications settings.
-Fix console error when no map is defined.
-Fix Date range selector in narrow web browser window.
-Fix missing DPI users (name & icon).
-Fix missing location alias Neighboring Access Points page.
-Fix upload of map image during remote access.
-IPv6 - save dhcpv6_pd_size as string.
-Enable dead peer detection (DPD) on auto-S2S VPN.
-Exclude WAN subnets from policy routing, which fixes issues like THIS.
-Add NAT of other WAN IPs out of WANs, fixing several issues related to multi-WAN.
Firmware changes since 3.9.9:
[UAPG3] Minimum rate fixes.
[UAP] Improve guest portal redirector handling.
[UAP] Fix a bug with L3 wireless adoption.
[UAP] Various bugfixes and improvements.
[USW] Revise DHCP snooping debug changes.
[USW] Improvements to DHCP guarding and snooping.
--
5.7.7 Changelog
New Features
-Add IPv6 support (Beta).
-Add restart devices permission.
-Add support for new Elite Device service.
-Add Bulgarian translations to the Hotspot Portal.
Controller bugfixes/changes since 5.7.4:
-Add overflow menu icon in top right corner.
-Add customize columns to switch properties port list.
-Add WebGL support detection on Maps.
-Allow to open debug terminal and airtime/airview in the same time.
-Allow to use URL for DHCP TFTP Server in Network configuration.
-Include AC InWall in Statistics/Switch view.
-Remember last visited Insights, Stats and Maps page.
-Topology view: show bonding enabled on AP-HD.
-Fix case when Calendar dropdown is cut off on small screens.
-Fix client name not showing correctly in DPI Application Usage widget.
-Fix collapsible cells in device table.
-Fix disabling Hotspot Welcome Text.
-Fix empty tabs in property panel after adopting device in Managed by Other state.
-Fix for Topology view - AP channels are hidden after collapsing and restoring parent node.
-Fix positioning line chart's tooltip on narrow screens, when the chart is too close to the top of container.
-Fix remembering rows per page on Insights pages.
-Fix selecting default Echo Server in the USG Advanced Settings.
-Fix USG memory usage and average load is not displayed in devices list.
-Fix Wi-Fi icon on OS X High Sierra (Chrome & Firefox).
-Fix WLAN VLAN range.
-Fix no DPI data for some time in users tab in traffic stats.
-Setting RF Scanning state just after scan is started.
-Improve default allocation logic to make it more suitable for memory constrained systems (see our notice HERE).
-Various backend improvements and bugfixes.
Firmware changes since 3.9.7:
[UAPG3] Further improvements to device upgrade and boot times.
[AC-IW/IW-Pro] Improve VLAN config, and prevent traffic leaks.
[UAP] Sort 802.11k scan entries by RSSI.
[UAP] Fix bandsteering.
[UAP] Fix bridge priority so the secondary Ethernet port remains enabled (reported HERE).
[UAP] DFS improvements.
[UAP] Various bugfixes and improvements.
[USW] Add port ID in STP error message.
[USW] Add DHCP snooping debug command.
[USW] Lower STP topology change log level.
[USXG] Improve LAG config handling.
[HW] Merge release-denver code.
[HW] Update openssl package to 1.0.2m.
--
5.7.4 Changelog
New Features
-Batch remove vouchers.
-Customize voucher columns.
-Ability to display historical statistics per Client (traffic, packets, signal power etc.).
-Add support for SNMPv3.
Controller bugfixes/changes since 5.7.3:
-Add "Reset columns" dropdown to client list column selector.
-Add uplink to device list.
-Confirm before setting PoE mode to 24v passive or passthrough.
-Make TX/RX labels consistent.
-Always show at least the primary channel in the 5G/2G radio columns on device list.
-Fix disabling Hotspot Terms of Service.
-Fix for allowing to restart empty list of devices.
-Fix map device RF button not working correctly.
-Fix reordering firewalls rules.
-Fix case when two clicks needed to close dropdown list.
-Fix the guest portal and preview.
-Security improvements.
-Various backend improvements and bugfixes.
Firmware changes since 3.9.6/4.4.8:
[UAPG1/G2] Add net-snmp.
[EDU] Fix the issue with volume not applying (reported HERE).
[UAP] DFS false positive improvements.
[UAP] Fix an issue preventing bandsteering from being enabled.
[UAP] Fix an issue with the downlink monitor.
[UAP] Add uplink prioriy for the bridge interfaces.
[UAP] Various bugfixes and improvements.
[USL2] Improve PSU status reporting.
[USG] Fix crash in "mcad" where there were DHCP leases with hardware addresses longer than an actual MAC address.
[USG] Includes more packages with debug symbols available to help diagnose crashes from submitted core files.
[USG] Fix crash in ubnt-util.
[USG] Fix crash in "redirector".
[USG] Added GeoIP back end.
[USG] Fix DHCPv6 client problem causing renewal failures in some circumstances.
[USG] Dynamic DNS back end updates in preparation for expanding DDNS support in controller.
[USG] L2TP VPN permitted encryption algorithms tightened to remove weak ciphers. All reasonably modern clients are already using a strong option, so there will be no change in behavior. Some ancient clients may not support any of these options.
[USG] UniFi reporting back end additions for IPv6.
[USGXG] Several display-related fixes and improvements.
[USGXG] Fan control improvement for noise reduction at low fan speeds.
[HW] Security improvement.
*there may still be some provisions which stop traffic from passing for 10+ seconds.
--
5.7.3 Changelog
Controller bugfixes/changes since 5.7.1:
-Add Incompatible Model Warning.
-Enable Custom Antenna Gain if user is Professional Installer.
-Improve SSH keys validation.
-Add Manage profiles link to switch port forms.
-Add different styles per log level for Controller Logs.
-Add button to download controller logs.
-Add button to fetch previous controller logs.
-Show the Ports tab for In-Wall APs.
-Add channel utilization to detailed overlay on Maps.
-Update translations.
-Fix applying custom antenna gain for US region.
-Add horizontal rule in Debugging metrics for better separation of items.
-Fix WLAN group queue changes pre-population.
-Fix device name and icon missing in DPI Users view.
-Fix Device Required badge blinking for short time after view is loaded.
-Fix resetting speed test on site switch.
-Fix setting VHT160 for devices which support it.
-Fix incorrect client count in filter drop-down.
-Fix disappearing upgrade button upon renaming.
-Fix incorrect dark styles for Firmware Manager.
-Fix for selecting the same map in map switcher.
-Update WebRTC JNI to v1.0.27.
-Various backend bugfixes and improvements.
Firmware changes since 3.9.3:
[UAP] Various backend fixes and/or improvements.
[USL2] Improve fan levels.
[USXG] Fix an issue with SFP speed autodetection.
[USXG] Improve handling of IPv6 frames.
[HW] Improve event notification on device upgrade.
[SEC] Fix CVE-2017-14106.
--
5.7.1 Changelog
Controller bugfixes/changes since 5.7.0:
-Show pending adoption devices based event.
-Add "Require MS-CHAP v2" control for L2TP Remote User VPN.
-Add egress rate limiting in Switch Profiles.
-Improve error handling when device is busy on airTime.
-Hide incorrect band options for RF scan.
-Pre-cache the app in browser - should speedup loading that app [Beta].
-Fix displaying SSH keys on the bright settings page.
-Fix for slow dpi restriction list display.
-Fix currently selected element in airTime when filters change.
-Fix showing channels in system config view.
-Fix disappearing WLANs section in property panel after config change.
-Fix for missing uplink section in known clients.
-Fix UI glitches in Chrome.
-Fix overlapping information in Channel Utilization.
-Fix displaying virtual device on site change.
-Fix displaying clients in device list.
-Fix name of device in Firmware Manager list.
-Remove non-existing USG8 from Virtual Devices.
-Remove port profiles for In-Wall AP.
-Update translations.
-Improve static route validation.
-Upgrade Tomcat to 7.0.82.
-Database migration improvements and fixes.
-Database management improvements for UCK.
-Security fixes.
-Various backend bugfixes and improvements.
Firmware changes since 3.9.2/4.3.60:
[ACIWPro] Enable DFS support.
[UAP] Add more security details to scan info.
[UAP] Security patch for the WPA2 vulnerability called KRACK (details HERE).*
[UAP] Various backend fixes and/or improvements.
[USXG] Fix fastpath tools.
[USG] Updates NTP, net-snmp, IGMP proxy, conntrack-tools, webproxy packages to same as latest EdgeRouter release.
[USG] Correct auto S2S VPN status reporting.
[USG] L2TP fix for problem that could result in pppd exiting after a client connects. Unclear whether anyone has encountered this problem on USG, but could result in L2TP stopping working until a reboot.
[USG] Fix for WLAN DPI blocking and related log spam.
[USG] Fix for PPPoE usernames longer than 4000 characters, and usernames containing '/'.
[USG] Update dnsmasq to 2.78. Fixes several security issues published by Google.
[HW] Improve error codes returned on firmware upgrade fail.
*This primarily affects devices that support STA mode. It's worth noting that 1st gen AC devices do not support STA mode, which is why we have only released a 3.9.x firmware.
--
5.7.0 Changelog
New Features
-Add GeoIP Filtering options to settings [Beta].
-Add Virtual devices on Maps to plan coverage.
-Add SSH keys to authenticate to device.
-Add Auto Channel feature on Maps.
-Add Release Notes.
-Add ability to create and set user defined DHCP options.
-Add Wireless Uplink priority.
Controller bugfixes/changes since 5.6.18:
-Add 'Disable CCK rates' checkbox for 2G Data Rate Control.
-Add continue shopping button to cart.
-Add client device type detection.
-Add duplicate WLANs functionality to WLAN Group.
-Add checkbox to enable LLDP on all interfaces in Gateway Advanced property panel.
-List incompatibile devices in Device Firmware Upgrade Notification.
-Store selected DPI categories per site.
-Improve date range picker.
-Improve list of Unplaced Devices on Maps.
-Improve validation for adding the same MAC address in MAC filter.
-Improve DPI restrictions.
-Fix device channel in channel utilization.
-Fix scrollbar on firewall group modal.
-Fix colours of DPI categories widgets.
-Fix Cancel Migration section in Property Panel for switches.
-Translate DPI categories.
-Add Russian translations.
-Various backend improvements and bugfixes.
Firmware changes since 3.9.0:
[UAPG3] Enable SHA512 support.
[UAP] Implement backend for SNMPv3 support.*
[UAP] Fix a RADIUS related bug with fast-apply.
[UAP] Numerous backend fixes and/or improvements.
[USL2] Fix PSU status detection.
[USW] Fix a bug preventing DHCPv6 from functioning in some cases.
[USW] Fix an issue with removing VLAN tags.
[USW] Various backend fixes and/or improvements.
*controller support is pending.
