President Trump is once more pushing to have his border wall painted black, a design change that is projected to add at least $500 million in costs, according to government contracting estimates obtained by The Washington Post.
The president’s determination to have the steel bollards coated in black has fluctuated during the past several years, and military commanders and border officials believed as recently as last fall that they had finally talked him out of it. They consider the black paint unnecessary, costly and a significant long-term maintenance burden, and they left it out of the original U.S. Customs and Border Protection design specifications.
Smugglers are sawing through new sections of Trump’s border wall
Trump has not let go of the idea, insisting that the dark color will enhance its forbidding appearance and leave the steel too hot to touch during summer months. During a border wall meeting at the White House last month amid the coronavirus pandemic, the president told senior adviser Jared Kushner and aides to move forward with the paint job and to seek out cost estimates, according to four administration officials with knowledge of the meeting.
“POTUS has changed his mind and now wants the fence painted. We are modifying contracts to add,” said one official involved in the construction effort who, like others, spoke on the condition of anonymity for fear of being fired.
Trump ramps up border-wall construction ahead of 2020 vote
Trump, during that meeting, directed aides to seek input from North Dakota-based Fisher Sand and Gravel, a company the president favors. Fisher has a $400 million contract to build a section of new barrier in Arizona, an award that is under review by the Department of Defense inspector general.
The Post obtained a copy of painting estimates that federal contracting officials produced, and it shows costs ranging from $500 million for two coats of acrylic paint to more than $3 billion for a premium “powder coating” on the structure’s 30-foot steel bollards, the high end of the options the officials have identified.
The White House has not yet chosen a grade of paint, but Trump has insisted for years that the barrier should be black to discourage climbers. He has favored a shade known as “flat black” or “matte black” because of its heat-absorbent properties.
The president has promoted the border wall in tweets as well as in private conversations in recent weeks, aides say, amid criticism of the administration’s handling of the coronavirus pandemic. He has also touted the structure — along with his efforts to block immigration — as a defense against the virus and a benefit to public health.
‘Take the land’: President Trump wants a border wall. He wants it black. And he wants it by Election Day.
Trump has made the border wall a pillar of his reelection pitch, promising to finish 500 miles by early next year, a goal that will require crews to nearly double their pace in coming months. Crews have completed about 175 miles of new barriers so far, according to the latest CBP data.
The White House declined to comment. A White House official speaking on the condition of anonymity to discuss internal matters said Trump thinks the black paint would make the structure more difficult to climb and less likely to rust. CBP did not respond to requests for comment on Trump’s decision to have the wall painted.
The steel used for the project is designed to be weather resistant, with a 30-year service life, despite exposure to intense solar radiation and extreme temperature changes. Painting the bollards would add significant costs to what already is one of the most expensive federal infrastructure projects in U.S. history.
The White House has obtained about $15 billion for the project so far, two-thirds of which has been diverted from Defense Department construction funds and counternarcotics programs. CBP projections indicate the money will pay for approximately 731 miles of new barriers, but those estimates did not take into account the president’s painting plans.
Officials working on the project said the paint job risks slowing the pace of construction, because crews will need to return to already-completed sections of the barrier, which quickly oxidizes into an orange hue with exposure to the elements.
Engineers also note that painting sections that are already set in concrete and weathered will be significantly more expensive than painting the bollards in advance of setting them in place.
“Painting it before it’s installed would be cheaper,” said Ed Zarenski, a retired construction cost estimator in Massachusetts who worked on large public works projects. “Otherwise you’ll have to run a bucket truck on both sides of the barrier.”
One official with knowledge of the plans said it wasn’t clear how the painting crews would operate on the Mexico side of the barrier, where only a narrow strip of land separates the two countries. Painters would potentially need to apply the black coating using a specialized boom long enough to extend up and over the barrier from the U.S. side.
The Trump administration had a section of new barrier in California painted black last year, at a cost of about $1 million per mile, but U.S. troops provided the labor for that effort, reducing costs.
The private contractors are projected to charge about $1.2 million per mile to apply two coats of acrylic paint, estimates show. That is by far Trump’s cheapest option, but documents note that repairs to the structure will be impossible to color-match with the acrylic paint, making welds and other patches obvious and unsightly.
Scarring is certainly a factor in high-traffic border regions. The Post reported last month that smuggling crews in the San Diego area sawed into the new bollard fencing 18 times during a one-month span last year.
Other midrange paint options include a military-grade epoxy coating and sealant used for dams, canals and other hydraulic infrastructure projects, known as System 21, the documents show. It is highly resistant to abrasion and rust and is amenable to welding, but the cost would be at least $4.5 million per mile.
Trump’s border wall, vulnerable to flash floods, needs large storm gates left open for months
Even more expensive would be a black powder coating, a process commonly used to paint cars and appliances because of its sleek appearance. It would cost $6.8 million per mile to apply, according to the government estimates.
Trump told military commanders and border officials to research different painting options and to consult with Fisher in particular.
Last year, after Sen. Kevin Cramer (R-N.D.) heavily promoted Fisher to the president as a cheaper option for building the border wall, Trump urged aides to give the firm a building contract. The North Dakota company and its owner have donated to Cramer and the president, and the company sued the government when its border wall bids were not accepted.
The U.S. Army Corps awarded the company a contract worth up to $400 million in December to complete 31 miles of new barriers along a National Wildlife Refuge in Arizona. After lawmakers raised concerns about White House interference in the contracting process, the Pentagon’s inspector general said it would audit the Fisher deal.
One administration official working on the project said Trump’s mention of Fisher in a recent meeting about the wall project did not amount to an attempt to influence the painting contract, and instead reflected his opinion of the company and its CEO, Tommy Fisher, whom the president sees as an innovative thinker and loyal supporter. Attorneys for Fisher did not respond to requests for comment.
During the same White House meeting, Kushner expressed frustration at the pace of land acquisition in the Rio Grande Valley of South Texas, where the Trump administration is preparing to seize hundreds of parcels of private land from owners who have refused to sell.
[...]
/img-s3.ilcdn.fi/f4e16665156f4a37d14f54bb22b113fab167b9e9a4c42dbd2fc7099aa99dbc5c.jpg)
joo.. taas.
