- Liittynyt
- 17.10.2016
- Viestejä
- 160
Sain tuossa viimein tapeltua mailcow:n siten että toimii traefikin takaa. Ajattelin tänne internetin syövereihin jättää nämä conffit jotka itselle toimivat.
DNS
traefik docker-compose.yml
mailcow docker-compoese.yml
docker-compose.override.yml mailcowlle
mailcow.conf
DNS
traefik docker-compose.yml
mailcow docker-compoese.yml
docker-compose.override.yml mailcowlle
mailcow.conf
# ------------------------------
# mailcow web ui configuration
# ------------------------------
# example.org is _not_ a valid hostname, use a fqdn here.
# Default admin user is "admin"
# Default password is "moohoo"
MAILCOW_HOSTNAME=mail.seomadomain.fi
# Password hash algorithm
# Only certain password hash algorithm are supported. For a fully list of supported schemes,
# see Password hashing - mailcow: dockerized documentation
MAILCOW_PASS_SCHEME=BLF-CRYPT
# ------------------------------
# SQL database configuration
# ------------------------------
DBNAME=<enkerro>
DBUSER=<enkerro>
# Please use long, random alphanumeric strings (A-Za-z0-9)
DBPASS=<enkerro>
DBROOT=<enkerro>
# ------------------------------
# REDIS configuration
# ------------------------------
REDISPASS=<enkerro>
# ------------------------------
# HTTP/S Bindings
# ------------------------------
# You should use HTTPS, but in case of SSL offloaded reverse proxies:
# Might be important: This will also change the binding within the container.
# If you use a proxy within Docker, point it to the ports you set below.
# Do _not_ use IPORT in HTTP(S)_BIND or HTTP(S)_PORT
# IMPORTANT: Do not use port 8081, 9081, 9082 or 65510!
# Example: HTTP_BIND=1.2.3.4
# For IPv4 leave it as it is: HTTP_BIND= & HTTPS_PORT=
# For IPv6 see IP bindings - mailcow: dockerized documentation
HTTP_PORT=10080
HTTP_BIND=0.0.0.0
HTTPS_PORT=10443
HTTPS_BIND=0.0.0.0
# Redirect HTTP connections to HTTPS - y/n
HTTP_REDIRECT=n
# ------------------------------
# Other bindings
# ------------------------------
# You should leave that alone
# Format: 11.22.33.44:25 or 12.34.56.78:465 etc.
SMTP_PORT=25
SMTPS_PORT=465
SUBMISSION_PORT=587
IMAP_PORT=143
IMAPS_PORT=993
POP_PORT=110
POPS_PORT=995
SIEVE_PORT=4190
DOVEADM_PORT=127.0.0.1:19991
SQL_PORT=127.0.0.1:13306
REDIS_PORT=127.0.0.1:7654
# Your timezone
# See List of tz database time zones - Wikipedia for a list of timezones
# Use the column named 'TZ identifier' + pay attention for the column named 'Notes'
TZ=Europe/Helsinki
# Fixed project name
# Please use lowercase letters only
COMPOSE_PROJECT_NAME=mailcowdockerized
# Used Docker Compose version
# Switch here between native (compose plugin) and standalone
# For more information take a look at the mailcow docs regarding the configuration options.
# Normally this should be untouched but if you decided to use either of those you can switch it manually here.
# Please be aware that at least one of those variants should be installed on your machine or mailcow will fail.
DOCKER_COMPOSE_VERSION=
# Set this to "allow" to enable the anyone pseudo user. Disabled by default.
# When enabled, ACL can be created, that apply to "All authenticated users"
# This should probably only be activated on mail hosts, that are used exclusively by one organisation.
# Otherwise a user might share data with too many other users.
ACL_ANYONE=disallow
# Garbage collector cleanup
# Deleted domains and mailboxes are moved to /var/vmail/_garbage/timestamp_sanitizedstring
# How long should objects remain in the garbage until they are being deleted? (value in minutes)
# Check interval is hourly
MAILDIR_GC_TIME=7200
# Additional SAN for the certificate
#
# You can use wildcard records to create specific names for every domain you add to mailcow.
# Example: Add domains "example.com" and "example.net" to mailcow, change ADDITIONAL_SAN to a value like:
#ADDITIONAL_SAN=imap.*,smtp.*
# This will expand the certificate to "imap.example.com", "smtp.example.com", "imap.example.net", "smtp.example.net"
# plus every domain you add in the future.
#
# You can also just add static names...
#ADDITIONAL_SAN=srv1.example.net
# ...or combine wildcard and static names:
#ADDITIONAL_SAN=imap.*,srv1.example.com
ADDITIONAL_SAN=
# Obtain certificates for autodiscover.* and autoconfig.* domains.
# This can be useful to switch off in case you are in a scenario where a reverse proxy already handles those.
# There are mixed scenarios where ports 80,443 are occupied and you do not want to share certs
# between services. So acme-mailcow obtains for maildomains and all web-things get handled
# in the reverse proxy.
AUTODISCOVER_SAN=y
# Additional server names for mailcow UI
#
# Specify alternative addresses for the mailcow UI to respond to
# This is useful when you set mail.* as ADDITIONAL_SAN and want to make sure mail.maildomain.com will always point to the mailcow UI.
# If the server name does not match a known site, Nginx decides by best-guess and may redirect users to the wrong web root.
# You can understand this as server_name directive in Nginx.
# Comma separated list without spaces! Example: ADDITIONAL_SERVER_NAMES=a.b.c,d.e.f
ADDITIONAL_SERVER_NAMES=webmail.seomadomain.fi,autoconfig.seomadomain.fi,autodiscover.seomadomain.fi
# Skip running ACME (acme-mailcow, Let's Encrypt certs) - y/n
SKIP_LETS_ENCRYPT=n
# Create separate certificates for all domains - y/n
# this will allow adding more than 100 domains, but some email clients will not be able to connect with alternative hostnames
# see 404 | Dovecot CE
ENABLE_SSL_SNI=n
# Skip IPv4 check in ACME container - y/n
SKIP_IP_CHECK=y
# Skip HTTP verification in ACME container - y/n
SKIP_HTTP_VERIFICATION=y
# Skip Unbound (DNS Resolver) Healthchecks (NOT Recommended!) - y/n
SKIP_UNBOUND_HEALTHCHECK=n
# Skip ClamAV (clamd-mailcow) anti-virus (Rspamd will auto-detect a missing ClamAV container) - y/n
SKIP_CLAMD=n
# Skip Olefy (olefy-mailcow) anti-virus for Office documents (Rspamd will auto-detect a missing Olefy container) - y/n
SKIP_OLEFY=n
# Skip SOGo: Will disable SOGo integration and therefore webmail, DAV protocols and ActiveSync support (experimental, unsupported, not fully implemented) - y/n
SKIP_SOGO=n
# Skip FTS (Fulltext Search) for Dovecot on low-memory, low-threaded systems or if you simply want to disable it.
# Dovecot inside mailcow use Flatcurve as FTS Backend.
SKIP_FTS=n
# Dovecot Indexing (FTS) Process maximum heap size in MB, there is no recommendation, please see Dovecot docs.
# Flatcurve (Xapian backend) is used as the FTS Indexer. It is supposed to be efficient in CPU and RAM consumption.
# However: Please always monitor your Resource consumption!
FTS_HEAP=128
# Controls how many processes the Dovecot indexing process can spawn at max.
# Too many indexing processes can use a lot of CPU and Disk I/O.
# Please visit: 404 | Dovecot CE for more information
FTS_PROCS=1
# Allow admins to log into SOGo as email user (without any password)
ALLOW_ADMIN_EMAIL_LOGIN=n
# Enable watchdog (watchdog-mailcow) to restart unhealthy containers
USE_WATCHDOG=y
# Send watchdog notifications by mail (sent from watchdog@MAILCOW_HOSTNAME)
# CAUTION:
# 1. You should use external recipients
# 2. Mails are sent unsigned (no DKIM)
# 3. If you use DMARC, create a separate DMARC policy ("v=DMARC1; p=none;" in _dmarc.MAILCOW_HOSTNAME)
# Multiple rcpts allowed, NO quotation marks, NO spaces
#WATCHDOG_NOTIFY_EMAIL=a@example.com,b@example.com,c@example.com
#WATCHDOG_NOTIFY_EMAIL=
# Send notifications to a webhook URL that receives a POST request with the content type "application/json".
# You can use this to send notifications to services like Discord, Slack and others.
#WATCHDOG_NOTIFY_WEBHOOK=https://discord.com/api/webhooks/XX...XXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXX
# JSON body included in the webhook POST request. Needs to be in single quotes.
# Following variables are available: SUBJECT, BODY
#WATCHDOG_NOTIFY_WEBHOOK_BODY='{"username": "mailcow Watchdog", "content": "****\n"}'
# Notify about banned IP (includes whois lookup)
WATCHDOG_NOTIFY_BAN=n
# Send a notification when the watchdog is started.
WATCHDOG_NOTIFY_START=y
# Subject for watchdog mails. Defaults to "Watchdog ALERT" followed by the error message.
#WATCHDOG_SUBJECT=
# Checks if mailcow is an open relay. Requires a SAL. More checks will follow.
# Servercow
# Servercow
# No data is collected. Opt-in and anonymous.
# Will only work with unmodified mailcow setups.
WATCHDOG_EXTERNAL_CHECKS=n
# Enable watchdog verbose logging
WATCHDOG_VERBOSE=n
# Max log lines per service to keep in Redis logs
LOG_LINES=9999
# Internal IPv4 /24 subnet, format n.n.n (expands to n.n.n.0/24)
# Use private IPv4 addresses only, see Private network - Wikipedia
IPV4_NETWORK=172.22.1
# Internal IPv6 subnet in fc00::/7
# Use private IPv6 addresses only, see Private network - Wikipedia
IPV6_NETWORK=fd4d:6169:6c63:6f77::/64
# Use this IPv4 for outgoing connections (SNAT)
#SNAT_TO_SOURCE=
# Use this IPv6 for outgoing connections (SNAT)
#SNAT6_TO_SOURCE=
# Create or override an API key for the web UI
# You _must_ define API_ALLOW_FROM, which is a comma separated list of IPs
# An API key defined as API_KEY has read-write access
# An API key defined as API_KEY_READ_ONLY has read-only access
# Allowed chars for API_KEY and API_KEY_READ_ONLY: a-z, A-Z, 0-9, -
# You can define API_KEY and/or API_KEY_READ_ONLY
#API_KEY=
#API_KEY_READ_ONLY=
#API_ALLOW_FROM=172.22.1.1,127.0.0.1
# mail_home is ~/Maildir
MAILDIR_SUB=Maildir
# SOGo session timeout in minutes
SOGO_EXPIRE_SESSION=480
# SOGo URL encryption key (exactly 16 characters, limited to A–Z, a–z, 0–9)
# This key is used to encrypt email addresses within SOGo URLs
SOGO_URL_ENCRYPTION_KEY=0HOJWrRUrP1PQO9H
# DOVECOT_MASTER_USER and DOVECOT_MASTER_PASS must both be provided. No special chars.
# Empty by default to auto-generate master user and password on start.
# User expands to DOVECOT_MASTER_USER@mailcow.local
# LEAVE EMPTY IF UNSURE
DOVECOT_MASTER_USER=
# LEAVE EMPTY IF UNSURE
DOVECOT_MASTER_PASS=
# WebAuthn device manufacturer verification
# After setting WEBAUTHN_ONLY_TRUSTED_VENDORS=y only devices from trusted manufacturers are allowed
# root certificates can be placed for validation under mailcow-dockerized/data/web/inc/lib/WebAuthn/rootCertificates
WEBAUTHN_ONLY_TRUSTED_VENDORS=n
# Spamhaus Data Query Service Key
# Optional: Leave empty for none
# Enter your key here if you are using a blocked ASN (OVH, AWS, Cloudflare e.g) for the unregistered Spamhaus Blocklist.
# If empty, it will completely disable Spamhaus blocklists if it detects that you are running on a server using a blocked AS.
# Otherwise it will work normally.
SPAMHAUS_DQS_KEY=
# IPv6 Controller Section
# This variable controls the usage of IPv6 within mailcow.
# Can either be true or false | Defaults to true
# WARNING: MAKE SURE TO PROPERLY CONFIGURE IPv6 ON YOUR HOST FIRST BEFORE ENABLING THIS AS FAULTY CONFIGURATIONS CAN LEAD TO OPEN RELAYS!
# A COMPLETE DOCKER STACK REBUILD (compose down && compose up -d) IS NEEDED TO APPLY THIS.
ENABLE_IPV6=false
# Prevent netfilter from setting an iptables/nftables rule to isolate the mailcow docker network - y/n
# CAUTION: Disabling this may expose container ports to other neighbors on the same subnet, even if the ports are bound to localhost
DISABLE_NETFILTER_ISOLATION_RULE=n
TRUSTED_PROXIES=172.18.0.1
